Filament Database / Initial Build

3D Printer Filament Guide

A practical guide for material features, use cases, print temperatures, drying requirements, nozzle sizes, and initial compatibility checks for Bambu Lab H2D + AMS 2 Pro.

Reference Printer

Bambu Lab H2D + AMS 2 Pro

Max nozzle: 350C
Max bed: 120C
Chamber: 65C
AMS drying: 65C

Initial materials

Tungsten carbide

Nozzle material

0.2 / 0.4 / 0.6 / 0.8mm

Supported nozzles

AMS 2 Pro

Drying and feeding

Material	Status	Use cases	Nozzle/Bed	Drying	Nozzle/Hardware	Notes
PETG Standard A practical material with better heat and impact resistance than PLA.	Ready Score: 100 ・A good candidate for this printer. Fine-tune with brand-specific profiles.	JigsCasesIndoor functional parts	Nozzle: 215-270C Bed: 70-90C	55C / 6h Need: recommended	0.4 / 0.6mm Hardened nozzle: none AMS: compatible	Can bond strongly to PEI; glue can be used as a release layer.
PLA Standard The easiest standard material for decorative prints, prototypes, and everyday test parts.	Ready Score: 100 ・A good candidate for this printer. Fine-tune with brand-specific profiles.	PrototypesDecorative partsFit checks	Nozzle: 185-235C Bed: 45-65C	45C / 6h Need: optional	0.4 / 0.6mm Hardened nozzle: none AMS: compatible	On enclosed printers like H2D, open the door or top cover if heat builds up too much.
PLA+ Standard A tougher PLA variant that is less brittle and useful for practical small parts.	Ready Score: 100 ・A good candidate for this printer. Fine-tune with brand-specific profiles.	Everyday itemsCasesPrototype jigs	Nozzle: 200-230C Bed: 45-65C	45C / 6h Need: optional	0.4 / 0.6mm Hardened nozzle: none AMS: compatible	Brand differences are significant; start with the manufacturer profile.
PVB Specialty A decorative material that can be smoothed with alcohol.	Ready Score: 100 ・A good candidate for this printer. Fine-tune with brand-specific profiles.	FiguresDecorative parts	Nozzle: 200-220C Bed: 60-80C	45C / 8h Need: recommended	0.4mm Hardened nozzle: none AMS: compatible	Use ventilation and avoid flames when smoothing with alcohol.
HIPS Support A material often used as support for ABS-like prints and soluble in limonene.	Conditional Score: 92 ・AMS 2 Pro feeding needs condition checks.	Support for ABS/ASALightweight parts	Nozzle: 225-255C Bed: 100-110C Chamber: 45-65C	60C / 4-6h Need: optional	0.4 / 0.6mm Hardened nozzle: none AMS: caution	Solvent use requires proper safety handling.
PLA-CF / PLA-GF Filled Carbon- or glass-fiber PLA with a light, stiff feel and abrasive behavior.	Conditional Score: 92 ・AMS 2 Pro feeding needs condition checks.	JigsVisual partsLightweight cases	Nozzle: 200-240C Bed: 45-65C	55C / 6-8h Need: recommended	0.4 / 0.6mm Hardened nozzle: required AMS: caution	H2D hardened gear and tungsten carbide nozzle are well suited for this group.
Glow PLA Filled Glow-in-the-dark PLA. It glows in darkness but is highly abrasive.	Conditional Score: 84 ・AMS 2 Pro feeding is not recommended. Consider an external spool.	SignsAccessoriesMarker parts	Nozzle: 200-240C Bed: 50-70C	45C / 6h Need: optional	0.4 / 0.6mm Hardened nozzle: required AMS: not recommended	Avoid 0.2mm nozzles because clogging risk is high.
Metal-filled PLA Filled Metal-filled PLA with weight and texture, but it is abrasive.	Conditional Score: 84 ・AMS 2 Pro feeding is not recommended. Consider an external spool.	Decorative partsPlatesWeighted small items	Nozzle: 190-230C Bed: 50-70C	45C / 6h Need: optional	0.4 / 0.6mm Hardened nozzle: required AMS: not recommended	H2D tungsten carbide nozzle is favorable for abrasive filaments.
PETG-CF / PETG-GF Filled Fiber-filled PETG with a useful balance of stiffness and manageable warping.	Conditional Score: 84 ・Drying is required. Keep the material dry before and during printing. ・AMS 2 Pro feeding needs condition checks.	JigsCasesFunctional parts	Nozzle: 240-280C Bed: 70-90C	65C / 8-12h Need: required	0.4 / 0.6mm Hardened nozzle: required AMS: caution	A 0.6mm nozzle is often more reliable against clogging.
PVA / BVOH Support Water-soluble support material for dual-nozzle and multi-material prints.	Conditional Score: 84 ・Drying is required. Keep the material dry before and during printing. ・AMS 2 Pro feeding needs condition checks.	Supports for complex geometryClean support interfaces	Nozzle: 195-215C Bed: 45-60C	45C / 8h Need: required	0.4mm Hardened nozzle: none AMS: caution	Some use cases pair well with H2D dual-nozzle printing.
TPU 95A Flexible A flexible material for phone cases, feet, seals, and soft parts.	Conditional Score: 84 ・AMS 2 Pro feeding is not recommended. Consider an external spool.	Rubber feetCasesCushion parts	Nozzle: 220-260C Bed: 40-85C	60C / 4-6h Need: recommended	0.4 / 0.6mm Hardened nozzle: none AMS: not recommended	Printable on H2D, but AMS feeding depends heavily on the exact TPU.
Wood PLA Filled Wood-filled PLA with a wood-like finish, but higher clogging risk.	Conditional Score: 84 ・AMS 2 Pro feeding is not recommended. Consider an external spool.	Decorative partsPlatesSmall items	Nozzle: 190-230C Bed: 50-70C	45C / 6h Need: recommended	0.4 / 0.6mm Hardened nozzle: recommended AMS: not recommended	Avoid 0.2mm nozzles; start with 0.4mm or larger.
ABS Engineering A heat- and impact-resistant functional material that benefits from enclosure control.	Conditional Score: 82 ・Recommended drying temperature 80C exceeds AMS 2 Pro max 65C. Use an external dryer. ・AMS 2 Pro feeding needs condition checks.	Mechanical partsJigsHeat-resistant cases	Nozzle: 230-255C Bed: 90-110C Chamber: 45-65C	80C / 4h Need: recommended	0.4 / 0.6mm Hardened nozzle: none AMS: caution	Use ventilation and odor control.
ASA Engineering Similar to ABS, with improved UV resistance for outdoor use.	Conditional Score: 82 ・Recommended drying temperature 80C exceeds AMS 2 Pro max 65C. Use an external dryer. ・AMS 2 Pro feeding needs condition checks.	Outdoor partsSigns and platesWeather-resistant cases	Nozzle: 220-275C Bed: 90-110C Chamber: 45-65C	80C / 4h Need: recommended	0.4 / 0.6mm Hardened nozzle: none AMS: caution	Works well with H2D heated chamber control.
PP Engineering A lightweight, chemically resistant material that is challenging for adhesion and warping.	Conditional Score: 82 ・Recommended drying temperature 70C exceeds AMS 2 Pro max 65C. Use an external dryer. ・AMS 2 Pro feeding needs condition checks.	ContainersLightweight partsChemical-resistant parts	Nozzle: 220-245C Bed: 70-100C	70C / 2-4h Need: recommended	0.4 / 0.6mm Hardened nozzle: none AMS: caution	PP tape or a dedicated adhesive may be needed.
PA / Nylon Engineering A tough engineering material with strong wear resistance and high moisture sensitivity.	Conditional Score: 74 ・Recommended drying temperature 90C exceeds AMS 2 Pro max 65C. Use an external dryer. ・AMS 2 Pro feeding needs condition checks.	GearsHingesWear parts	Nozzle: 240-285C Bed: 70-115C Chamber: 45-65C	90C / 6-12h Need: required	0.4 / 0.6mm Hardened nozzle: none AMS: caution	Keep it dry before and during printing for reliable results.
PA-CF / PA-GF Filled Fiber-filled nylon for demanding functional parts, with strict drying requirements.	Conditional Score: 74 ・Recommended drying temperature 90C exceeds AMS 2 Pro max 65C. Use an external dryer. ・AMS 2 Pro feeding needs condition checks.	High-strength jigsMechanical partsWear-resistant parts	Nozzle: 260-300C Bed: 90-120C Chamber: 50-65C	90C / 8-12h Need: required	0.4 / 0.6mm Hardened nozzle: required AMS: caution	H2D temperature capability is sufficient; drying equipment is the bottleneck.
PC Engineering A high-strength, high-temperature material that needs heat and warp control.	Conditional Score: 74 ・Recommended drying temperature 85C exceeds AMS 2 Pro max 65C. Use an external dryer. ・AMS 2 Pro feeding needs condition checks.	Heat-resistant jigsStrong functional parts	Nozzle: 270-300C Bed: 100-120C Chamber: 50-65C	85C / 5h Need: required	0.4 / 0.6mm Hardened nozzle: none AMS: caution	H2D has enough temperature headroom, but drying and warp control are required.

Data notes

This guide is a baseline. Final settings should be tuned using each brand profile, temperature towers, drying state, and build plate conditions.

Bambu Lab H2D product specifications Bambu Lab H2D user manual Bambu Lab AMS 2 Pro Prusa Filament Material Guide Prusa Drying Filament Bambu Filament Guide